筑造一座桥梁 科技连接世界
首页 > 产品与技术 > 精密定位平台 > 精密转台 > ALAR 系列机械轴承精密直驱转台

Aerotech  ALAR系列机械轴承精密直驱转台提供出色的角度定位和速度控制,并且拥有非常大的通孔,便于安装其它装置和布线。
 ★ 5种不同的通孔孔径尺寸:100,150,200,250,325mm
 ★ 大轴承组件提供高有效负载和扭矩负载能力
 ★ 无齿隙
 ★ 无齿轮磨损导致的精度变化
 ★ 定位精度:±3.9 arc-sec
 ★ 负载:6463N

 
zPictures/Product_425.jpg   ALAR 转台性能指标

5 different aperture sizes: 100 mm, 150 mm, 200 mm, 250 mm, 325 mm
Continuous or limited travel
High axial load capacity of 300-1000 lb
Large bearings provide high payload and moment load capacity
Excellent accuracy and repeatability
Low wobble and bearing run out
Cog free motor provides smooth motion
No gear backlash
No accuracy changes over time from gear wear
45-300 rpm continuous rotation speed
Perfect for applications with payloads that must be at the center of rotation; great for AZ roll gimbal applications
Vac 10-6 torr compatible versions available

 

Aerotech’s ALAR series direct-drive rotary stages provide superior angular positioning and velocity control with exceptionally large apertures. With the combination of a large aperture and direct-drive motor, the ALAR series makes worm-drive large aperture stages a thing of the past.

Advantage ALAR
Now customers can get large aperture rotary stages with zero backlash, and no gear wear or gear vibration as is commonly seen in worm-drive stages. The other added benefit is that direct drive is significantly faster than worm drive, so testing can be completed in less time. In production settings, this equates to faster testing, lower cost manufacturing, and higher profits. From the standpoint of system accuracy and repeatability, the stage will maintain its performance over time with no need for maintenance because there are no gears to wear out. With higher accuracy and no backlash, customers can produce more accurate products because their test system is now more accurate.

Applications
Applications for the ALAR include single and multiaxis electro-optic sensor testing, missile seeker testing, antenna testing, inertial navigation device testing, photonic component alignment, high-accuracy laser machining, and precision wafer inspection. These include testing in vacuum to 10-6 torr. These rotary stages can also be configured as multiaxis gimbals.

High Speed
Conventional worm-drive rotaries with similar apertures and payload capacity only operate to 15 rpm or less. These direct-drive stages have been tested to 85 rpm continuous rotation – over 5 times faster than worm drives.

Superior Mechanical Design
Angular contact bearings are used to maximize performance with respect to wobble, moment stiffness, and rotating friction. A precision-machined shaft further minimizes wobble. The design incorporates integral connections that minimize cable issues. The ALAR works especially well in applications that require 360° continuous motion, but have limited space. The stage is 65-160 mm tall and provides smooth motion without travel restrictions.

Brushless Direct-Drive
To maximize positioning performance, the ALAR series utilizes Aerotech’s brushless, slotless motors. This motor has all of the advantages of a brushless direct-drive motor – no brushes to wear, no gear trains to maintain, and high acceleration and high speeds. Since it is a slotless, ironless design, there is zero cogging, meaning there is absolutely no torque ripple. This makes the ALAR ideal for applications requiring outstanding contoured motion, smooth scan velocity, or precise incremental steps.

High Payload Capacity and Large Moment Load Stiffness
The ALAR comes in two different configurations. The standard profile (SP) unit has high payload capacity and high moment load stiffness so it can handle applications where its rotation axis is parallel or perpendicular to gravity and the payload center of gravity is cantilevered away from the stage. The low profile (LP) unit has high payload capacity and is good for applications where the axis of rotation is parallel to gravity. Both the SP and LP units have the same aperture options and motor options. Either SP or LP stages can handle between 300-1000 lb of axial load.
 
Accurate Positioning
Performance is assured with encoder line counts from 31000 to 74000 per rev, resulting in resolutions from 0.02 arc sec/count to 0.009 arc sec/count. The motor and high-performance rotary encoder are directly coupled to a common shaft. The absence of gear trains and mechanical couplings means no position errors caused by hysteresis, windup, or backlash. As a result, accuracy of ±3.9 arc sec and bi-directional repeatability of ±0.5 arc sec is attainable.

Flexible Configurations
Aerotech manufactures a wide range of servo amplifiers and advanced controllers to provide a complete, integrated package.

Note:     
1. This is the fundamental encoder resolution before multiplication or quadrature. With Aerotech controls, divide the resolution by 1000X to 8000X to get actual     available resolution – i.e., 10 arc- sec fundamental = 10/8000 = 0.00125 arc sec actual usable resolution.     
2. The ALAR-LP base must be fully supported by a rigid mounting plate to achieve this moment load.      
3. Accuracy assumes calibration.

版权所有 © 2012-2015 北京奥控科技有限公司
京ICP备13029215号-1
A-CON is a motion control, positioning and automation systems integrator.

地址:北京市昌平区立汤路188号北方明珠大厦1号楼2319室
电话:+86 010-57798807 邮箱:service@aconmc.com 
奥控科技官方微博 北京奥控科技
关闭
010-57798807 工作日:9:00-18:00
周 六:9:00-18:00
点击这里给我发消息