筑造一座桥梁 科技连接世界
首页 > 产品与技术 > 精密定位平台 > 精密转台 > ADRT 系列机械轴承精密直驱转台
Aerotech 的 ADRT 系列精密直驱转台提供出众的角度定位和速度控制。ADRT精密转台应用范围从分度到高速激光设备到精密硅片检测。
   ★ 直径:146 - 260 mm 
   ★ 精度:±30 arc sec
   ★ 负载:30 - 173 kg
 
zPictures/Product_428.jpg   ADRT 直驱转台性能指标

High torque output, direct-drive brushless servomotor
Cog-free design for outstanding velocity stability
Outstanding wobble and runout
Direct coupled, high-accuracy rotary encoder
Large diameter clear aperture

 

Aerotech’s ADRT series direct-drive rotary stages provide superior angular positioning and velocity control. Applications range from indexing to high-speed laser machining to precision wafer inspection.

Superior Mechanical Design
Dual large-diameter bearings are used to maximize performance with respect to wobble, moment stiffness, and repeatability. The large diameter bearings permit large payloads without compromising performance.

Brushless Direct Drive
To maximize positioning performance, the ADRT series utilizes Aerotech’s S-series brushless, slotless motor. This motor has all the advantages of a brushless direct-drive motor – no brushes to wear, no gear trains to maintain, and high acceleration and high speeds. Since it is a slotless, ironless design, there is zero cogging, meaning that there is absolutely no torque ripple.

With its low inherent inertia and optimized motor design, the ADRT is capable of speeds and accelerations that are significantly higher than other competing products. These stages have a lower height profile compared to competing products within given torque ranges.

The low inertia and zero backlash make the ADRT the ideal solution for applications requiring frequent directional changes.

Accurate Positioning
Line counts range from 3600 to 5400 lines per revolution. When coupled with Aerotech’s MXH series resolution multipliers, resolutions can be as fine as 0.12 arc sec.

The motor and high-performance rotary encoder are directly coupled to a common shaft. The absence of gear trains and mechanical couplings means no position errors caused by hysteresis, windup, or backlash.

Flexible Configurations
Options include a high-precision bearing for improved accuracy, smoothness, and run-out performance. Slip rings and rotary unions are available to ease integration of custom tooling, and a holding brake is available to limit movement of the stage during large impulse loads or when power is removed from the motor.

The ADRT is the only rotary table available with integrated “T-slots.” These slots can be used to mount the table horizontally or to attach custom application specific fixtures.

Aerotech manufactures a wide range of servo amplifiers and advanced controllers to provide a complete integrated package.

Notes:
1. -P accuracy requires calibration and Aerotech controls.
2. Specifications are for single-axis systems. Performance of multi-axis systems is payload and workpoint dependent. Consult factory for multi-axis or non-standard applications.
3. Moment load based on 5 year continuous rotation at 250 rpm with maximum axial load applied. Larger moment loads possible for low speed and/or low duty cycle applications. Consult Aerotech for additional information.

Notes:
1. -P accuracy requires calibration and Aerotech controls.
2. Specifications are for single-axis systems. Performance of multi-axis systems is payload and workpoint dependent. Consult factory for multi-axis or non-standard applications.
3. Moment load based on 5 year continuous rotation at 250 rpm with maximum axial load applied. Larger moment loads possible for low speed and/or low duty cycle applications. Consult Aerotech for additional information.

 

版权所有 © 2012-2015 北京奥控科技有限公司
京ICP备13029215号-1
A-CON is a motion control, positioning and automation systems integrator.

地址:北京市昌平区立汤路188号北方明珠大厦1号楼2319室
电话:+86 010-57798807 邮箱:service@aconmc.com 
奥控科技官方微博 北京奥控科技
关闭
010-57798807 工作日:9:00-18:00
周 六:9:00-18:00
点击这里给我发消息